10/2006
xii
Phaser 8510/8560MFP Multifunction Product
Regulatory Specifications, Phaser 8510/8560MFP
Initial Issue
Introduction
This product, if used properly in accordance with the user’s instructions, is neither dangerous
for the consumer nor for the environment.
A signed copy of the Declaration of Conformity for this product can be obtained from Xerox.
Phaser 8510/8560MFP Overview
The Phaser 8510/8560MFP uses a Printhead and four-color (YMCK) solid-ink sticks, with an
image processor supporting PostScript 3 and PCL5c page description languages. The system
is a high performance, Letter or A4, 24 (8510MFP) or 30 (8560MFP) page per minute (ppm)
multifunction product, supporting resolutions up to 525 x 1200 dots-per-inch (dpi). The product
features USB, Fax, and 10/100 base T Ethernet ports, with an optional Foreign Device Inter-
face (FDI) for specialized installations. The 8510/8560MFP provides a 100-sheet Tray 1 from
which specialty media, card stock, and envelopes are fed. Tray 1 also supports manual feed-
ing. Tray 2 provides 525 sheets of capacity. The Output Tray holds 250 sheets facedown. On
most configurations an Automatic Document Feeder (DADF) is installed providing enhanced
document handling functionality.
Phaser 8510/8560MFP options add memory, media capacity and functionality. RAM memory
upgrades are available to raise installed memory to the 1 GB maximum. A 525-Sheet Feeder is
also available. Two 525-Sheet Feeders may be installed to raise the maximum media input
storage capacity to 1675 sheets. A Configuration Card stores system model identity and con-
figuration parameters.
After a predefined period of time since its last activity, the Phaser 8510/8560MFPP enters a
power saver standby mode. All communications interfaces remain active and have the ability to
wake the system up.
Figure 1 Phaser 8510/8560MFP Multifunction Product with Optional Trays
Table 1 Low Voltage Directive 73/23/EEC as amended
EN 60950-1:2001
Table 2 Electromagnetic Compatibility Directive 89/336/EEC as amended
EN 55022:1998 +A1:2000 +A2:2003
EN 55024:1998 +A1:2000 +A2:2003
EN 61000-3-2:2000
EN 61000-3-3:1994
IEC 61000-4-2:1995
IEC 61000-4-3:1995
IEC 61000-4-4:1995
IEC 61000-4-5:1995
IEC 61000-4-6:1996
IEC 61000-4-11:1994
Summary of Contents for PHASER 8560MFP
