Xerox PHASER 8560MFP, Service Documentation

Page: 19 / 296

10/2006
xix Phaser 8510/8560MFP Multifunction Product
Specifications
Introduction Initial Issue
Print Engine Specifications
Scanner/DADF Specifications
Electrical Specifications
Environmental Specifications
Table 6 Print Engine Functional Specifications
Characteristic Specification
Printing process Solid-ink
Controller 500 MHz processor
Color medium Yellow, cyan, magenta, and black ink sticks, each shape-
coded. The system uses the subtractive color system to
produce the colors red, green, and blue
Color Management Automatic, Black & White,
Office: sRGB, Vivid Color, None,
Press: Commercial, Euroscale, SWOP
FPOT, Color Copy < 15 seconds per page/1st copy
subsequent copies at printer speed.
Memory 2 slots; minimum 512 MB, maximum 1 GB, PC133 DRAM
Fonts 137 PostScript 3
81 PCL5c
Warm-up time From Off (cold start): 12 minutes
From power saver: 4 minutes
Table 7 Scanner/DADF Functional Specifications
Characteristic Specification
Printing Process Print Engine
Scan to Capabilities Scan to Disk (mailbox) function
Scan to PC
Scan/Copy Process Flatbed platen and C-shape ADF
Charge Coupled Device scan head
RGB color pack
The scan controller provides 16 bit DMA interface for sending
image data through the scanner board to the image proces-
sor board in the electronics module.
Copies per Minute DADF: 20 ppm simplex, 10 ppm duplex
Memory 2 MB (1M x 16 SDRAM)
Image Buffer 32 MB SDRAM for Platen
128 MB SDRAM for DADF
Bit Depth Reading: 48 bits
Output: 24 bits
Optical Resolution 600 x 300 to 600 x 2400 dpi (FS x SS)
Output Resolution from Scan-
ner Always equals optical resolution
Calibration Time less than 2 seconds (performed prior to copier and scan
operations)
Power Saver Mode Scanner and DADF are switched OFF. Also, lamps automati-
cally turn off after 20 minutes.
Noise Standby: < or equal to 45 dB
Scanning: < or equal to 50 dB
Table 8 Electrical Specifications
Characteristic Specification
Primary Line Voltages 90-135 VAC
180-254 VAC
Primary Line Voltage Fre-
quency Range 47 - 63 Hz
Power Consumption at Rated
Voltage Input 300 W (average during printing)
1500 W (peak) - 1000 typical
220 W (idle)
Energy Star 70 W
Scanner Power Supply 30 W
Table 9 Environmental Specifications
Characteristic Specification
Operating Storage
Temperature
10
º
- 32
º
C / 50º - 90º F operating
-30
°
C to 60
°
C (-22 F to 140 F)
Humidity 10% - 80% RH Non-Condensing
operating 30% to 95% RH, non-condensing
Altitude 0 to 2,438 meters (8,000 ft.) 0 to 6,092 meters (20,000 ft.)
Acoustic Noise (db) Operating Mode Standby Mode
Table 7 Scanner/DADF Functional Specifications
Characteristic Specification