10/2006
8-24
Phaser 8510/8560MFP Multifunction Product
Image Output Terminal
Initial Issue
Theory of Operation
Personality parameters are a subset of network configuration parameters, which are populated
to the configuration card over time as the system is configured by the customer. The personal-
ity parameters are copied, or “shadowed”, from the main board's NVRAM chip to the configura-
tion card during the normal operation of the system. When the configuration card is inserted
into a new system, the personality parameters on the configuration card are written into the
NVRAM chip of the new system. When a system is powered on, if it contains the configuration
card of another system, the personality parameters are automatically copied to the NVRAM
chip. If the configuration card is removed, the system reboots as a non-networking, non-
duplexing model.
Table 3 Parameters Stored in the Configuration Card
NCL Subject
NCL Item
Size (bytes)
N/A “version” not
NCL parameter
version (of the layout of personality
parameters)
4
NEST
Base Printer Name
48
NEST
SysAdmin Contact
128 (truncated from 256)
NEST
Printer Location
128 (truncated from 256)
NEST
Asset Identifier
128 (truncated from 256)
IP
Host Name
64
IP
Domain Name
256
IP
Network Mask
4
IP
IP Address
4
IP
Default Gateway
4
IP
BOOTP/DHCP
1
IP
DDNS
1
IP
SMTP Server
256
IP
IP Source
1
IP
TCP/IP
1
IP
AutoIP
1
IP
DHCP Vendor Class ID
48
DNS Resolver
Primary Name Server IP Address
4
DNS Resolver
Secondary Name Server IP Address
4
DNS Resolver
Multicast DNS
1
NBNS (WINS)
Enable
1
NBNS (WINS)
WINS Note Type
1
NBNS (WINS)
Primary WINS Server
4
NBNS (WINS)
Seconday WINS Server
4
Ethernet
Speed
1
HTTP
On
1
HTTP
Information Forwarding
1
HTTP
SMTP Server Automatic
1
HTTP
Legal Settings
1
HTTP
Admin_Password
11
HTTP
Admin_Username
11
HTTP
KeyUser_Password
11
HTTP
KeyUser_Username
11
HTTP
Admin_HostAccessList
256
HTTP
KeyUser_HostAccessList
256
Notify
On
1
IPP
Authentication Scheme
1
IPP
IPP Username
11
IPP
IPP Password
11
FTP
Login Password
33
Security
Print Hosts
256
AppSocket
On
1
AppSocket
Enabled
1
LPR
On
1
LPR
Enabled
1
FTP
On
1
FTP
Enabled
1
IPP
On
1
IPP
Enabled
1
MIME
On
1
MIME
Enabled
1
EtherTalk
On
1
EtherTalk
Enabled
1
PSERVER
On
1
PSERVER
Enabled
1
PSERVER_IPX
Enabled
1
Notes:
1. “Parallel” and “USB”, “On” and “Enabled” parameters have not been identified as
personality parameters. They are not tied to networking.
2. NCL = Nest Configuration Library
Table 3 Parameters Stored in the Configuration Card
NCL Subject
NCL Item
Size (bytes)
Summary of Contents for PHASER 8560MFP
