Xerox PHASER 8560MFP, Service Documentation

Page: 16 / 296

10/2006
xvi Phaser 8510/8560MFP Multifunction Product
Parts of the Product, Control Panel Layout
Initial Issue Introduction
Routine Maintenance Items
Figure 5 Routine Maintenance Items and Consumables
Control Panel Layout
The Control Panel functions are segregated into three areas.
Figure 1 Control Panel
Control Panel Left
The left side of the control panel contains the following copy, scan, and fax function buttons and
LEDs. A lighted LED indicates the current selection. Figure 2 shows each function’s location.
Figure 2 Left Side Control Panel
1. Color Mode selects black and white or color for copy or scan jobs.
2. Document Type selects the type of document (photo, graphic, mixed text and graphics, or
text only), for copy or scan jobs.
3. Output Quality selects the output quality mode for copies: fast color, standard, enhanced,
or high-resolution/photo.
4. 2-Sided selects either one or 2-sided for the original and one- or 2-sided for the output.
5. Lighten/Darken selects a setting for copy, scan, or fax jobs.
6. Reduce/Enlarge selects scale percentage for output: 25, 50, 100, 150, 200, 400.
Table 1 Routine Maintenance Life Expectancy
Routine Maintenance Items
Extended-Capacity Maintenance Kit 30,000 cycles (0-20% coverage)
20,000 cycles (20-100%) coverage.
Standard-Capacity Maintenance Kit 10,000 cycles
Waste Tray Empty every 7 Purges
DADF Pick Rollers and Separator Pad 50,000 scans
Table 1 Control Panel Functional Areas
Left Side Center Right Side
Copy, Scan, and Fax functions
and indicator LEDs Display, Mode, Navigation but-
tons, and status LED’s Numeric keypad, Stop, Start,
Clear, and Clear All buttons