Xerox PHASER 8560MFP, Service Documentation

Page: 152 / 296

10/2006
4-38 Phaser 8510/8560MFP Multifunction Product
REP 2.0.22, REP 3.0.1
Initial Issue Repairs and Adjustments
REP 2.0.22 Preheater Lift Solenoid
Parts List on PL 2.0
Removal
1. Remove the Scanner Assembly and attached DADF (REP 1.0.11).
2. Remove the Output Tray (REP 1.0.6).
3. Remove the Left Side Cover (REP 1.0.7).
4. Remove the Right Side Cover (REP 1.0.21).
5. Remove the Upper Duplex Guide (REP 3.0.5).
6. Remove the Outer Duplex Guide (REP 3.0.6).
7. Disconnect the Preheater Solenoid (P/J202).
8. Remove the screw that secures the solenoid to the Transfix Load Module.
Figure 1 Removing the Preheater Solenoid
REP 3.0.1 Inner Simplex Guide
Parts List on PL 3.0
Removal
1. Open the Front Door.
2. Raise the Lower Duplex Guide.
3. Pry inward on the 2 retainers to release them from the mounting post.
4. Slide the guide down and forward to remove it from the chassis.
Figure 1 Removing the Inner Simplex Guide
Replacement
Position the fingers on the Inner Simplex Guide over the segmented roller. Install the guide by
snapping the left side to the retaining post, then the right side.