Xerox PHASER 8560MFP, Service Documentation

Page: 294 / 296

10/2006
8-22 Phaser 8510/8560MFP Multifunction Product
Image Output Terminal
Initial Issue Theory of Operation
Figure 22 Transfix Components
After the leading edge of the paper is beyond the paper release guide, the paper release sole-
noid is de-energized. Once the solenoid is de-energized, the solenoid return spring provides
force to move the solenoid plunger out of the solenoid coil which rotates the paper release car-
riage back to its ready position.
The deskew rollers are not driven during transfixing. The media path drive rotates the exit roll-
ers in the correct direction to pull the paper out with the deskew clutch deenergized.
As the process drive lifts the transfix roller, the exit rollers transport the paper into the exit mod-
ule. The media is then fed out over the ink loader until the trailing edge is at the nip of the exit
module roller. The elevator motor raises the carriage assembly to the top position, where it then
stops and the drive motor drives the exit module rollers until the media exits the IOT ending the
print cycle.