manualshive.com logo in svg

WinGD X82-B, Maintenance Manual

Share
Download
WinGD X82-B Maintenance Manual Download Page 770

15.1

General for tools

For the maintenance of the engine it is necessary to have the correct tools. WinGD has
specified a number of tools in the three groups that follow:

•

Standard tools

Standard tools are general available tools (for example wrenches or pliers) or are
specially made for the engine. WinGD supplies all standard tools together with the
engine.

•

Recommended tools

Recommended tools are specially made for the engine. They help to do the related
maintenance work easier. WinGD supplies these tools only if you tell WinGD to do so.

•

Loaned tools

Loaned tools are specially made for the engine for special maintenance work. WinGD
supplies these tools only temporary on a loan basis if you tell WinGD to do so.

X82-B

AA00-0000-00AAA-018O-A

Maintenance Manual

General for tools

Winterthur Gas & Diesel Ltd.

- 770 -

Issue 001 2020-10

Summary of Contents for X82-B










































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands