manualshive.com logo in svg

WinGD X82-B, Maintenance Manual

Share
Download
WinGD X82-B Maintenance Manual Download Page 29

Code

Description

Length/type

Property

Example

? 

1

Shipdex item location code. A = infor-
mation related to items installed on the
product; B = information related to
items installed on a major assembly re-
moved from the product; C - informa-
tion related to items on the bench. In
this context, it does not matter, for ex-
ample, whether an item has been re-
moved from the product; D - informa-
tion related to all three locations A, B,
and C. No other combinations are al-
lowed.

1 alphabetic
character [A-D]

Shipdex specif-
ic

A

1

Placeholder symbol for alphabetic characters.

2

Placeholder symbol for numeric characters.

NOTE:

For the full list of available Shipdex information codes and more data about the
Shipdex specification, refer to www.shipdex.org.

X82-B

AA00-0000-00AAA-018E-A

Maintenance Manual

Data module codes (procedural data)

Winterthur Gas & Diesel Ltd.

- 29 -

Issue 001 2020-10

Summary of Contents for X82-B










































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands