WinGD X82-B, Maintenance Manual

Page: 126 / 841

NOTE: If the bearing shell (002) does not move freely during the removal
procedure, you must attach the lifting plate to the other side of the
turning out device. You must move the bearing shell back to its initial
position and do the removal procedure again.
3.9 Remove the turning out device, lifting plate and lever chain hoist from the
bearing shell.
3.10 Attach the lifting tool 94116A (001) to the bearing shell (002).
3.11 Attach the lever chain hoist (003) to the lifting tool (001).
3.12 Operate the lever chain hoist (003) to lift the bearing shell (002).
3.13 Attach the eye bolt 94045-M56 (004) to the roof of the column.
3.14 Attach the chain block 94017-2.5-5.4 (005) to the eye bolt (004) and the lifting
tool (001).
3.15 Operate the chain block (005) to hold the weight of the bearing shell (002).
3.16 Attach the shackle 94019P (011) to the column.
3.17 Attach the other chain block (010) to the shackle (011) and the lifting tool (001).
3.18 Operate the chain block (010) to hold the weight of the bearing shell (002).
3.19 Remove the lever chain hoist (003) from the column wall and the lifting tool
(001).
3.20 Attach the sling 94039-015 (009) to the gallery.
3.21 Attach the chain block 94017-2.5-6.5 (008) to the sling (009).
3.22 Operate the chain blocks (005, 010) to move the bearing shell a small distance
to the fuel side.
3.23 Attach the chain block (008) to the lifting tool (001).
3.24 Operate the chain block (008) to hold the weight of the bearing shell (002).
3.25 Remove the chain block (005) from the lifting tool (001).
3.26 Operate the chain blocks (010, 008) to move the bearing shell (002) through the
opening in the column.
3.27 Lower the bearing shell (002) on to an applicable surface.
X82-B
AA00-1132-00AAB-520A-A
Maintenance Manual Main bearing - bearing shell - No. 2 to # - remove
Winterthur Gas & Diesel Ltd.
- 126 - Issue 001 2020-10