Fig 8-78
Piston rod gland - attach (example)
00699
001
002
002
27
Remove the distance holders (003,
28
Attach the round nuts (001) to the elastic bolts, refer to section
29
Use the engine room crane to remove the installation tool from the cylinder liner.
30
Make sure that the cylinder liner and the antipolishing ring (006) are clean and in a
satisfactory condition.
31
Put oil on the surfaces of the antipolishing ring (006).
32
Attach the four lifting plates (005) to the antipolishing ring (006) with the four screws
(007).
33
Attach the lifting tool (004) to the lifting plates (005) an the engine room crane.
34
Operate the engine room crane to put the antipolishing ring (006) into the cylinder liner.
35
Remove the lifting tool (004).
X82-B
AA00-3403-00AAA-720A-A
Maintenance Manual
Piston - install
Winterthur Gas & Diesel Ltd.
- 487 -
Issue 001 2020-10
Summary of Contents for X82-B
