![WinGD X82-B Maintenance Manual Download Page 49](http://html1.mh-extra.com/html/wingd/x82-b/x82-b_maintenance-manual_986581049.webp)
2.1.2
General safety rules
If you do work at or near the engine, obey the rules that follow to prevent risks of harm or
damage to personal, to equipment, or to environment.
•
Rules for personnel
Put on the correct safety and protective equipment.
Use fall protection equipment when you work in a height of more than one meter.
Make sure that you know the fire-fighting procedures.
Make sure that you know the health and general safety data and the environment
protection data.
Prevent direct contact with operating media or with hot parts.
Only stay on areas that are intended for this.
Do not stay on pipes, valves or fittings.
Do not stay under hanging loads.
Do not put hands or feet under hanging loads.
Keep away from the running engine.
Keep ignition sources away from the engine.
Carry out all work carefully.
•
Rules for operation
Start the engine only if the engine is in good condition.
Keep the safety signs on the engine clean.
Keep unauthorized persons away from the engine.
Clean walk ways and stays regularly.
Open valves and shut-off devices carefully to prevent injury from released media.
Do not use water or cleaning fluid to clean the electronic components and control boxes.
•
Rules for service and maintenance
Keep the tools serviceable, for example calibrate gauges regularly.
Use the correct tools in a correct way, for example lifting devices and ropes.
Protect lifted parts with applicable materials.
Do work inside the engine with a safety person on the outside.
Put covers or protection on opened openings or on removed sealing faces.
Attach removed parts in the engine room to prevent movement of the parts.
Replace O-rings during an overhaul of components.
Make sure that after installation all pipes and items are fixed correctly.
Use lock wires, tab washers, and lock plates one time only.
Before you assemble screws and studs in very hot areas, apply on the threads a lubricant
that is resistant to high temperatures.
X82-B
AA00-0000-00AAA-012A-A
Maintenance Manual
Safety precautions and safety rules
Winterthur Gas & Diesel Ltd.
- 49 -
Issue 001 2020-10
Summary of Contents for X82-B
