WinGD X82-B, Maintenance Manual

Page: 649 / 841

PROCEDURE
1 Electric motor - free end
Do Step 1.1 to Step 1.28 to install the applicable electric motor at the free end:
1.1 Attach the two slings (003, Figure 11-10 ) to the electric motor (004) and the
shackle on the lifting tool (002).
1.2 Attach the engine room crane to the lifting tool (002).
1.3 Operate the engine room crane to lift and move the electric motor (004) into
position.
1.4 Attach the spur-geared chain block (011) to the shackle (001) and the shackle
on the lifting tool (002).
1.5 Attach the spur-geared chain block (009) to the shackle (010).
1.6 Operate the chain block (011) and the engine room crane until the electric motor
(004) is below the chain block (009).
1.7 Attach the chain block (009) to the shackle on the lifting tool (002).
1.8 Operate the chain block (009) to hold the weight of the electric motor (004)
1.9 Remove the engine room crane from the lifting tool (002).
1.10 Attach the spur-geared chain block (007) to the shackle (008).
1.11 Operate the chain blocks (009, 011) until the electric motor (004) is below the
chain block (007).
1.12 Attach the chain block (007) to the shackle on the lifting tool (002).
1.13 Operate the chain block (007) to hold the weight of the electric motor (004).
1.14 Carefully remove the chain block (011).
1.15 Attach the spur-geared chain block (005) to the shackle (006).
1.16 Operate the chain blocks (007, 009) to move the electric motor (004) into
position below the chain block (005).
1.17 Attach the chain block (005) to the shackle on the lifting tool (002).
1.18 Operate the chain block (005) to hold the weight of the electric motor (004).
1.19 Carefully remove the chain blocks (007, 009).
X82-B
AA00-6545-00AAA-720A-A
Maintenance Manual Auxiliary blower - install
Winterthur Gas & Diesel Ltd.
- 649 - Issue 001 2020-10