BR1DG
−
01
BR0070
−
BRAKE
LOAD SENSING PROPORTIONING AND BY
−
PASS
VALVE (LSP & BV)
BR
−
51
1996 LAND CRUISER (RM451U)
REASSEMBLY
1.
ASSEMBLE THESE PARTS TO LOAD SENSING
SPRING:
S
Load sensing valve boot
S
Load sensing spring boot
S
4 bushings
S
2 rubber plates
S
2 collars
HINT:
Apply lithium soap base glycol grease to the parts indicated by
the arrrows. Do not mistake the valve side for the shackle side
of the load sensing spring.
2.
INSTALL SHACKLE NO.1 AND NO.2 TO LOAD SENS-
ING SPRING
(a)
Install the lock nut and shackle No. 1 to the shackle
No. 2.
(b)
Torque the bolt and nut through the 2 plate washers.
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
3.
INSTALL LOAD SENSING SPRING TO VALVE BODY
Install the load sensing spring assembly to the load sensing
valve with the clip.
4.
INSTALL VALVE BRACKET
(a)
Install the set plate to the valve assembly through the
valve bracket and temporarily tighten the 2 valve body
mounting nuts.
(b)
Torque the bolt and nut through the 2 plate washers.
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010