−
BODY ELECTRICAL
COMBINATION METER
BE
−
35
1996 LAND CRUISER (RM451U)
RPM (DC 13.5 V, 25
°
C (77
°
F))
Standard indication
Allowable range
700
630
−
770
1,000
900
−
1,100
2,000
1,875
−
2,125
3,000
2,850
−
3,150
4,000
3,850
−
4,150
5,000
4,850
−
5,150
4.
INSPECT VOLTMETER
ON
−
VEHICLE:
Compare the tester and voltmeter indications.
If error is excessive, replace the voltemeter.
5.
INSPECT FUEL RECEIVER GAUGE OPERATION
(a)
Disconnect the connector from the sender gauge.
(b)
Turn the ignition switch ON, and check that the receiver
gauge needle indicates EMPTY.
(c)
Connect terminals 4 and 5 on the wire harness side con-
nector through a 3.4 W test bulb.
(d)
Turn the ignition switch ON, and check that the bulb lights
up and the receiver gauge needle moves towards the full
side.
HINT:
Because of the silicon oil in the gauge, it will take a short time
for needle to stabilize.
If operation is not as specified, inspect the receiver gauge resis-
tance.
6.
INSPECT FUEL RECEIVER GAUGE RESISTANCE
Between terminals
Resistance (
Ω
)
A
−
B
85.5
−
105.5
A
−
C
126
−
150
B
−
C
*90
−
110
*: Include voltmeter resistance
If resistance value is not as specified, replace the fuel receiver
gauge.
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010
