SR16D
−
02
R09496
SST
SR
−
16
−
STEERING
TILT STEERING COLUMN
1996 LAND CRUISER (RM451U)
REASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1.
COAT WITH MOLYBDENUM DISULFIDE LITHIUM
BASE GREASE (See page
SR
−
9
)
2.
INSTALL MAIN SHAFT ASSEMBLY
(a)
Install a new bearing, bearing thrust collar and compres-
sion spring to the shaft assembly.
(b)
Install the shaft assembly into the column upper tube.
(c)
Using SST, compress the compression spring.
SST
09950
−
40010 (09957
−
04010, 09958
−
04010)
NOTICE:
Do not bend the universal joint of the main shaft more than
20
°
.
(d)
Using snap ring pliers, install a new snap ring.
3.
INSTALL TURN SIGNAL BRACKET
Torque the 2 bolts.
Torque: 4.9 N·m (50 kgf·cm, 43 in.·lbf)
4.
SELECT TILT NO.2 BOLTS
Select the bolt with plain thread end when the column upper
tube mark is 2, and the bolt with the hollow
−
tipped thread end
when the mark is 1.
NOTICE:
Select the bolt type to match each number marked in the
squares on the upper tube.
5.
INSTALL COLUMN UPPER TUBE WITH MAIN SHAFT
ASSEMBLY
(a)
Install the collar to the shaft assembly.
(b)
Install a new snap ring.
(c)
Install the upper tube with the shaft assembly into the col-
umn lower tube.
(d)
Using a plastic hammer, drive in the 2 tilt No.2 bolts.
6.
INSTALL TILT LEVER LOCK SHAFT, TILT LEVER AS-
SEMBLY, TILT SUB LEVER AND TILT LEVER
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010
