Z11798
A
B
B
A
A
B
B
B
AT1369
AT
−
8
−
AUTOMATIC TRANSMISSION
VALVE BODY ASSEMBLY
792
Author:
Date:
1996 LAND CRUISER (RM451U)
HINT:
At the time of installation, replace the gaskets with new ones.
5.
REMOVE OIL PIPE
Pry up both pipe ends with a large screwdriver and remove the
pipe.
NOTICE:
At time of the installation, make sure that the oil pipe or the
magnet do not interfere with the oil pan.
6.
DISCONNECT CONNECTOR FROM EACH SOLENOID
VALVE
7.
REMOVE VALVE BODY
(a)
Remove the 17 bolts.
Torque:10 N·m (100 kgf·cm, 7 ft·lbf)
Bolt length:
Bolt A: 23 mm (0.91 in.)
Bolt B: 32 mm (1.26 in.)
(b)
Disconnect the throttle cable from the cam.
(c)
Remove the valve body.
NOTICE:
Be careful not to drop the check ball body and spring.
HINT:
At the time of installation, install the body together the check
ball body and spring and Align the groove of the manual valve
to the pin of the lever.
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010
