BO38W
−
01
−
BODY
QUARTER WINDOW GLASS
BO
−
55
1996 LAND CRUISER (RM451U)
INSTALLATION
1.
INSTALL WEATHERSTRIP ON GLASS
(a)
Attach the weatherstrip to the glass.
NOTICE:
If the weatherstrip has hardened, it may develop leaks. Use
a new one if possible.
(b)
Insert a cord into the groove of the weatherstrip all the way
around with the ends overlapping.
2.
INSTALL QUARTER WINDOW GLASS
(a)
Apply soapy water to contact surface of the weatherstrip
lip and to the body flange.
HINT:
Begin installation in the middle of the lower part of the quarter
window glass.
(b)
Hold the glass in position on the body.
(c)
From the inside, pull on one cord at an angle so it pulls the
lip over the flange. From the outside, press the glass
along the weatherstrip until the glass is installed.
3.
FIX IN GLASS
To make the glass fix snugly, tap from the outside with your
open hand.
4.
INSPECT FOR LEAKS AND REPAIR
(a)
Do a leak test.
(b)
Seal any leak with auto glass sealer.
5.
INSTALL ROOF HEADLINING
6.
INSTALL ASSIST GRIPS
7.
INSTALL REAR PILLAR GARNISH
8.
INSTALL QUARTER PILLAR GARNISH
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010
