PR0058
Matchmarks
PR06S
−
03
Z00753
PR0060
SST
A
PR0061
Z00754
SST
PR
−
6
−
PROPELLER SHAFT
SPIDER BEARING
854
Author:
Date:
1996 LAND CRUISER (RM451U)
SPIDER BEARING
REPLACEMENT
NOTICE:
Be careful not to grip the propeller shaft tube too tightly in
the vise as this will cause deformation.
1.
REMOVE PROPELLER SHAFT (See page
PR
−
3
)
2.
PLACE MATCHMARKS ON SHAFT AND YOKE
3.
REMOVE SNAP RINGS
(a)
Using a brass bar and hammer, slightly tap in the bearing
outer races.
(b)
Using 2 screwdrivers, remove the 4 snap rings from the
grooves.
4.
REMOVE SPIDER BEARINGS
(a)
Using SST, push out the bearing from the flange.
SST
09332
−
25010
HINT:
Sufficiently raise the part indicated by A so that it does not come
into contact with the bearing.
(b)
Clamp the bearing outer race in a vise and tap off the
flange with a hammer.
HINT:
Remove the bearing on the opposite side by the same proce-
dure.
(c)
Install the 2 removed bearing outer races to the spider.
(d)
Using SST, push out the bearing from the yoke.
SST
09332
−
25010
(e)
Clamp the outer bearing race in a vise and tap off the yoke
with a hammer.
HINT:
Remove the bearing on the opposite side in the same proce-
dure.
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010
