Toyota 1996 LAND CRUISER, User Manual

Page: 1022 / 1381

PR0069
PR0031
PR − 8
− PROPELLER SHAFT SPIDER BEARING
856 Author: Date:
1996 LAND CRUISER (RM451U)
7. INSTALL SNAP RINGS
(a) Install 2 new snap rings of equal thickness which will allow
0
− 0.05 mm (0 − 0.0020 in.) axial play.
HINT:
Do not reuse the snap rings.
Thickness of snap ring:
Front Propeller Shaft and Rear Propeller Shaft (Type
B)
Color Mark Thickness mm (in.)
− 1
2.100 − 2.150
(0.0827 − 0.0846)
− 2
2.150 − 2.200
(0.0846 − 0.0866)
− 3
2.200 − 2.250
(0.0866 − 0.0886)
Brown −
2.250 − 2.300
(0.0886 − 0.0906)
Blue −
2.300 − 2.350
(0.0906 − 0.0925)
− 6
2.350 − 2.400
(0.0925 − 0.0945)
− 7
2.400 − 2.450
(0.0945 − 0.0965)
− 8
2.450 − 2.500
(0.0965 − 0.0984)
Rear Propeller Shaft (Type A)
Color Thickness mm (in.)
− 2.00 (0.0787)
Brown 2.03 (0.0799)
Blue 2.06 (0.0811)
− 2.09 (0.0823)
(b) Using a hammer, tap the yoke until there is no clearance
between the bearing outer race and snap ring.
8. CHECK SPIDER BEARING (See page PR − 4 )
S
Check that the spider bearing moves smoothly.
S
Check the spider bearing axial play.
Bearing axial play: Maximum 0.05 mm (0.0020 in.)
HINT:
S
Install a new spider bearing on the flange side in the pro-
cedure described above.
S
When replacing the spider bearing, be sure that the
grease fitting assembly hole is facing in the direction
shown in the illustration.
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010