Connector
AB0163
Wire Harness
Diameter
Stripped Wire Harness Section
RS
−
14
−
SUPPLEMENTAL RESTRAINT SYSTEM
STEERING WHEEL PAD AND SPIRAL CABLE
1996 LAND CRUISER (RM451U)
2.
DEPLOYMENT WHEN DISPOSING OF STEERING
WHEEL PAD ONLY
NOTICE:
S
When disposing of the steering wheel pad (with air-
bag) only, never use the customers vehicle to deploy
the airbag.
S
Be sure to follow the procedure given below when de-
ploying the airbag.
HINT:
Have a battery ready as the power source to deploy the airbag.
(a)
Remove the steering wheel pad (See page
SR
−
11
).
CAUTION:
When storing the steering wheel pad, keep the upper sur-
face of the pad facing upward.
(b)
Remove the connector on the rear surface of the steering
wheel pad from the bracket.
(c)
Using a service
−
purpose wire harness, tie down the
steering wheel pad to the disc wheel.
Wire harness: Stripped wire harness section
1.25 mm
2
or more (0.0019 in
2
or more).
HINT:
To calculate the square of the stripped wire harness section:
Square = 3.14 x (Diameter)
2
divided by 4
CAUTION:
If a wire harness which is too thin or some other thing is
used to tie down the steering wheel pad, it may be snapped
by the shock when the airbag is deployed. This is highly
dangerous. Always use a wire harness for vehicle use
which is at least 1.25 mm
2
(0.0019 in
2
).
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010
