SA2442
R13332
SA2206
Z10098
SA
−
30
−
SUSPENSION AND AXLE
FRONT DIFFERENTIAL CARRIER
1996 LAND CRUISER (RM451U)
6.
w/o DIFFERENTIAL LOCK:
CHECK SIDE GEAR BACKLASH
Using a dial indicator, measure the side gear backlash with
holding one pinion gear toward the case.
Backlash: 0.05
−
0.20 mm (0.0020
−
0.0079 in.)
If the backlash is not within the specification, install the correct
thrust washers (See page
.
SA
−
35
).
7.
CHECK TOOTH CONTACT BETWEEN RING GEAR
AND DRIVE PINION (See page
SA
−
35
)
8.
w/ DIFFERENTIAL LOCK:
REMOVE ACTUATOR
(a)
Remove the bolt and actuator from the differential carrier.
(b)
Remove the O
−
ring.
9.
w/ DIFFERENTIAL LOCK:
REMOVE INDICATOR SWITCH
Remove the indicator switch and gasket.
10. w/ DIFFERENTIAL LOCK:
REMOVE SHIFT FORK SHAFT
(a)
Using a hexagon wrench, remove the 2 straight screw
plugs.
(b)
Remove the spring seat, compression spring and ball.
(c)
Using a pin punch and hammer, remove the slotted spring
pin.
(d)
Remove the 2 bolts from the shaft retainer.
(e)
Using a plastic hammer, tap out the shaft retainer.
(f)
Remove the shift fork shaft.
HINT:
Pull out the shift fork shaft with a screwdriver turned round.
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010
