SA1UG
−
01
W00495
SA2644
SST
R08383
R13137
−
SUSPENSION AND AXLE
STEERING KNUCKLE AND AXLE SHAFT
SA
−
13
1996 LAND CRUISER (RM451U)
REMOVAL
1.
REMOVE FRONT AXLE HUB (See page
SA
−
7
)
2.
REMOVE ABS SPEED SENSOR
Remove the 2 bolts and disconnect the speed sensor from the
steering knuckle.
3.
REMOVE DUST SEAL AND DUST COVER
Remove the 8 bolts, dust seal, dust cover and gasket.
4.
REMOVE KNUCKLE SPINDLE
(a)
Using a brass bar and hammer, tap the knuckle spindle
of the steering knuckle.
(b)
Remove the knuckle spindle and gasket.
5.
REMOVE AXLE SHAFT
Position one flat part of the outer shaft upward and remove the
axle shaft.
6.
DISCONNECT TIE ROD FROM KNUCKLE ARM
(a)
Remove the cotter pin and nut.
(b)
Using SST, disconnect the tie rod from the knuckle arm.
SST
09611
−
22012
7.
REMOVE OIL SEAL SET
(a)
Remove the 6 bolts from the end retainer.
(b)
Remove these parts from the steering knuckle:
S
Oil seal end retainer
S
Felt dust seal
S
Rubber seal
S
Steel ring
8.
REMOVE KNUCKLE ARM AND BEARING CAP
(a)
Remove the 2 bolts and plate washers from the bearing
cap.
(b)
Remove the 4 nuts from the knuckle arm.
(c)
Using a brass bar and hammer, tap on the 4 bolts heads
and remove the 4 cone washers.
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010
