LU0KE
−
03
LU
−
2
−
LUBRICATION
OIL AND FILTER
1996 LAND CRUISER (RM451U)
REPLACEMENT
CAUTION:
Prolonged and repeated contact with mineral oil will result
in the removal of natural fats from the skin, leading to dry-
ness, irritation and dermatitis. In addition, used engine oil
contains potentially harmful contaminants which may
cause skin cancer.Care should be taken, therefore, when
changing engine oil to minimize the frequency and length
of time your skin is exposed to used engine oil. Protective
clothing and gloves that cannot be penetrated by oil should
be worn. The skin should be thoroughly washed with soap
and water, or use water
−
less hand cleaner, to remove any
used engine oil. Do not used gasoline, thinners, or sol-
vents.In order to preserve the environment, used oil and
used oil filters must be disposed of only at designated dis-
posal sites.
1.
DRAIN ENGINE OIL
(a)
Remove the oil filler cap.
(b)
Remove the oil drain plug, and drain the oil into a contain-
er.
2.
REPLACE OIL FILTER
(a)
Using SST, remove the oil filter.
SST
09228
−
44011
(b)
Check and clean the oil filter installation surface.
(c)
Apply clean engine oil to the gasket of a new oil filter.
(d)
Lightly screw the oil filter into place, and tighten it until the
gasket contacts the seat.
(e)
Using SST, tighten it an additional 3/4 turn.
SST
09228
−
44011
3.
FILL WITH ENGINE OIL
(a)
Clean and install the oil drain plug with a new gasket.
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
(b)
Fill with new engine oil.
Oil grade:
See step 1 in oil pressure check
Capacity:
Drain and refill
w/ Oil filter change
7.2 liters (7.5 US qts, 6.3 lmp. qts)
w/o Oil filter change
6.9 liters (7.3 US qts, 6.1 lmp. qts)
Dry fill
8.0 liters (8.5 US qts, 7.0 lmp. qts)
(c)
Reinstall the oil filler cap.
4.
START ENGINE AND CHECK FOR LEAKS
5.
RECHECK ENGINE OIL LEVEL
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010