Toyota 1996 LAND CRUISER, User Manual

Page: 203 / 1381

BE − 60
− BODY ELECTRICAL SLIDING ROOF SYSTEM
1996 LAND CRUISER (RM451U)
3 − Ground
Sliding roof control switch position (TILT) OFF or
DOWN
No continuity
3 − Ground Sliding roof control switch position (TILT) UP Continuity
4 − Ground Constant No continuity
4 − 5 Constant *
1
Continuity
5 − Ground Constant No continuity
7 − Ground
Sliding roof control switch position (TILT) OFF or
UP
No continuity
7 − Ground Sliding roof control switch position (TILT) DOWN Continuity
8 − Ground
No.1 limit switch position OFF (Sliding roof tilted
up or open approx. 200 mm (7.87 in.))
No continuity
8 − Ground
No.1 limit switch position ON (Except for
conditions mentioned above)
Continuity
9 − Ground
No.2 limit switch position OFF (Sliding roof
closed)
No continuity
9 − Ground No.2 limit switch position ON (Sliding roof open) Continuity
11 − Ground Constant Continuity
6 − Ground Ignition switch position LOCK or ACC *
2
No voltage
6 − Ground Ignition switch position ON Battery positive voltage
12 − Ground Constant Battery positive voltage
*
1
: There is resistance because this circuit is include motor.
*
2
: Exceptions: During 60 second period after ignition switch
ON → OFF (ACC) or until driver or passenger door is opened
after ignition switch ON → OFF (ACC).
If circuit is as specified, replace the relay.
If circuit is not as specified, inspect the circuits connected to oth-
er parts.
7. INSPECT POWER MAIN RELAY CONTINUITY (See
page
BE − 46 )
Brought to you by BirfMark
Brought to you by BirfMark
Version 1.00 - 12/21/2010