Mindray Passport 5-Lead, Service Manual

Page: 109 / 544

Passport 5-Lead, 5L, LT, XG Service Manual 0070-00-0420 1 - 97
Operation (5-Lead, 5L, LT and XG) Operation (XG)
1.6 Operation (XG)
Abbreviated Operating Check List
CAUTION: Only use the Abbreviated Operating Check List if you are
already familiar with this product. If not, please continue
with the remainder of this chapter, Detailed Operating
Instructions.
A. Setting-Up
1.
Set POWER switch to OFF.
2.
Connect, if desired, peripheral equipment (i.e., Remote Color Display, P.C., etc.).
3.
Attach power pack and/or install charged batteries as needed.
4. Set POWER switch to ON.
5.
Using the menus and keyboard, set (when appropriate) the following:
B. ECG
1. Press LEAD to change viewed lead type (I,II, III, aVR, aVF, or V).
2. Press SIZE to change ECG waveform size.
3. Press the FREEZE key to freeze all waveforms. If the “Cascade ECG” waveform is
chosen as the second waveform, only the ECG waveform will be frozen.
C. Initiating an NIBP Measurement
1. Attach cuff hose to NIBP connector and place cuff on patient.
2. If necessary, set cuff pressure through NIBP menu.
3. Press START to immediately initiate NIBP measurement.
4. To enable automatic measurements, press INTERVAL key to set desired period. The
NIBP measurement will start when the
INTERVAL
time has expired.
5. Press DEFLATE to suspend measurement. This also stops interval measurements.
• Patient Size • ECG Information
• Set Up Information (speed, waveform
2 and 3, Auto Display, etc.)
• Resp. Information
• Recorder Information (when
available)
• Alarm Volume
• Alarm Limits • Beep Volume
• NIBP Information • Trend Clear (hold down Display key
for 3 seconds)
• IBP Information • CO
2
Information
• HR Information (Speed and Source) • Gas Module Information
• SpO
2
Information