Mindray Passport 5-Lead, Service Manual

Page: 19 / 544

Passport 5-Lead, 5L, LT, XG Service Manual 0070-00-0420 1 - 7
Operation (5-Lead, 5L, LT and XG) Controls, Indicators and Connectors (5-Lead, 5L, LT)
18. BEEP VOLUME
A repeat action key which adjusts the beep volume in 5 steps plus OFF. When the maximum
volume is reached, the volume will wrap around to OFF, then to the minimum volume
19. RECORD (Optional)
A combination single action and delayed action key which initiates or stops a recording.
Pressing the key once initiates a printout. Holding the key pressed for three seconds, when
waveforms are displayed, initiates a continuous printing of waveforms. Pressing the key
while the printing is in progress, stops the recorder. The recorder prints either waveforms or
trend data, depending on what is displayed (i.e. trend data is printed when trend list is
displayed.). The Recorder Set-up will determine which waveform or waveforms are printed.
The Recorder Set-up will also determine the Record Destination - Local (recording from the
Passport), Remote (recording from the VISA, no recording from the Passport), or Both
(recording from the Passport and VISA).
NOTE: When a remote (VISA) recording is printed, the information
that is printed is determined by the set-up in the VISA.
20. DC INPUT
A green LED used to indicate that the POWER Switch (33) is in the ON position.
FIGURE 1-2
Display
MENU
AREA PARAMETER
AREA
ECG AREA
MULTI-FUNCTION AREA
MESSAGE AREA