Mindray Passport 5-Lead, Service Manual

Page: 100 / 544

Controls, Indicators and Connectors (XG) Operation (5-Lead, 5L, LT and XG)
1 - 88 0070-00-0420 Passport 5-Lead, 5L, LT, XG Service Manual
FIGURE 1-53 Left Side Panel with Masimo SpO
2
25. RECORDER (Optional)
A two trace thermal strip chart recorder with integral paper spool.
26. BATTERY PACK
Two internal, user replaceable, rechargeable, sealed lead acid batteries that provide power
to operate the monitor when not connected to the power pack. The battery packs may be
removed and replaced independently while the unit is operating.
27. CUFF
A connector used to attach the NIBP cuff assembly to the monitor.
28. SpO
2
An 8-pin DIN type, 9-pin sub miniature D (Nellcor) type female connector or 14-pin sub
miniature D (Massimo) type female connector used to attach the SpO
2
sensor assembly to the
monitor.
29. T (Temperature)
A standard three wire phone jack used to mate with either the YSI series 400 or 700
temperature probes. The Passport XG automatically identifies which probe is connected.
30. ECG / EKG
A six-pin AAMI (ECG-D10/75) standard connector used for patient cable connections.
31. IBP1 (Optional)
A six-pin male connector used for Datascope specified pressure transducers listed in Chapter
5, Accessories of the Passport Operating Instructions Manual.
32. IBP2 (Optional)
A six-pin male connector used for Datascope specified pressure transducers listed in Chapter
5, Accessories of the Passport Operating Instructions Manual.
Press to Open
SpO2
CUFF
T
ECG/EKG
E.S.I.S.
All Patient Connections
Electrically Isolated
IBP 1
IBP 2
CO2
PI 2
PI 1
!
o
25
26
27
28
29
30
31
32
34
PUMP
INPUT
33
25
26
27
28
29
30
31
32
33
34