Mindray Passport 5-Lead, Service Manual

Page: 67 / 544

Passport 5-Lead, 5L, LT, XG Service Manual 0070-00-0420 1 - 55
Operation (5-Lead, 5L, LT and XG) Operation (5-Lead, 5L, LT)
1.3.15.1 Operation of Printer
1. Using the UP
p
and DOWN
q
arrow keys (1) select RECORDER from the main menu.
When RECORDER is highlighted a RECORDER MENU is displayed in the multi-function
area. A sample of this menu is show below.
FIGURE 1-25 Recorder Menu
2. Press SELECT (2) to enter the RECORDER MENU.
3. Using the UP
p
and DOWN
q
arrow keys (1) and SELECT (2) keys (as described in
“Use of Menus” on page 23) set the desired waveforms or trend to be printed.
4.
Press RECORD (19) to initiate a printing or stop a printing when one is in progress.
When RECORD (19) is pressed to initiate a printing, a 16 second strip is printed. The 16
second strip consists of 8 seconds of prior and 8 seconds of post waveform from when
RECORD (19) is pressed. If a continuous printing is required, press and hold RECORD (19)
for 3 seconds (until a beep is heard). Press RECORD again to stop a real time printing.
NOTES:
• When the ECG is frozen and RECORD (19) is pressed, the recorder prints the frozen
displayed ECG.
• If the RECORD key (19) is pressed for 3 seconds while the ECG is frozen, the recorder
prints a continuous real-time ECG waveform.
• If the RECORD key (19) is pressed while List Trend is displayed (and the ECG waveform is
not frozen), the recorder prints the list trend report.
• See Section 4.7, in the Operating Instructions, of paper installation.