Mindray Passport 5-Lead, Service Manual

Page: 89 / 544

Passport 5-Lead, 5L, LT, XG Service Manual 0070-00-0420 1 - 77
Operation (5-Lead, 5L, LT and XG) Introduction (XG)
1.4 Introduction (XG)
This section of the Service Manual provides general information about the Datascope
Passport XG Monitor.
Section 1.5 on page 1-77 and Section 1.6 on page 1-97 are included as a review of
instrument functions and operation, although the reader is encouraged to refer to the
Operating Instructions, P/N 0070-00-0397, for more complete details.
1.5 Controls, Indicators and Connectors (XG)
This section of the Operating Instructions identifies and describes each control and display of
the Datascope Passport XG Monitor.
Refer to the paragraph and page numbers listed below for the location of specific controls
and displays.
Step-by-step instructions for operation of the monitor are provided in “Operation (XG)” on
page 1-97.
The following is a list of all the controls, connectors and indicators and their item numbers.
The item number refers to the call outs on the drawings within this chapter of the manual. If
looking for a particular item, locate it on this list and then use the table below to determine
the page where it can be found.
1.
p
and
q
(Set-up) 9. FREEZE (ECG) 17. LIMITS (Alarms)
2.
SELECT (Set-up)
10.
ZERO 1 (IBP) (Optional)
18.
MUTE (Alarms)
3. EXIT (Set-up) 11. ZERO 2 (IBP) (Optional) 19. DISPLAY (Trends)
4.
ADMIT (Central) (Optional)
12.
CO
2
PUMP (Optional)
20.
p
and
q
(Trends)
5. DISCHARGE (Central)
(Optional) 13. START (NIBP) 21. BEEP VOLUME
6.
SILENCE (Central)
(Optional)
14.
INTERVAL (NIBP)
22.
PRINT (Optional)
7.
LEAD (ECG)
15.
DEFLATE (NIBP)
23.
BATTERY CHARGING
LED
8.
SIZE (ECG)
16.
VOLUME (Alarms/Alarms
LED)
24.
DISPLAY