Mindray Passport 5-Lead, Service Manual

Page: 187 / 544

Passport 5-Lead, 5L, LT, XG Service Manual 0070-00-0420 1 - 175
Operation (5-Lead, 5L, LT and XG) Operation (XG)
Print (22)
If the record destination in the record menu (see “Recorder Menu” on page 1-177) is set to
either remote or both, then pressing the print key will initiate a waveform printing on the VISA
central station.
1.6.23 Menus
This section contains all the menus used in the Passport XG. A sample of each menu with
each menu item highlighted is provided. For each menu item highlighted, the Choices bar
indicates the available selections. The menu Instructions bar indicates the available actions to
take. See “Use of Menus” on page 1-109 for detailed instructions on menu operation.
1.6.23.1 Patient Menu
Size: Changing the patient size will adjust the Passport XG for monitoring adults, pediatrics
or neonates. The alarm limit selections will change accordingly. The Passport displays the
patient size in the menu display area.
The following four options are available only if the Serial Output Type is set to “VISA with
Admit”:
Admit: Choosing “Yes” transmits an admit message to the VISA Central Station.
Discharge: Choosing “Yes” transmits a discharge message to the VISA Central Station.
Full Disclosure: If ON is desired, it must be selected prior to selecting Admit “YES”. Full
Disclosure “ON” requests that all patient data be stored at the VISA.
Arrhythmia: If ON is desired, it must be selected prior to selecting Admit “YES”.
Arrhythmia “ON” requests Arrhythmia detection to be enabled at the VISA.
Pacer Enhancement: Set to ON to display the pacer signal as a full scale square wave.