Mindray Passport 5-Lead, Service Manual

Page: 184 / 544

Operation (XG) Operation (5-Lead, 5L, LT and XG)
1 - 172 0070-00-0420 Passport 5-Lead, 5L, LT, XG Service Manual
1.6.21 Connection to External Devices (optional)
The Passport XG provides a high level ECG waveform output from the J1 connector (37). To
facilitate connection of the Passport to external devices requiring an ECG waveform for
synchronization, Datascope provides interface cable:
• P/N 0012-00-0753-01 cable which is terminated with a Hewlett Packard (HP) 8 pin
round connector, commonly used for ECG input on HP defibrillators.
This cable attenuates the high level ECG waveform output from the Passport XG Monitor to a
low level output and is intended to provide a means to synchronize compatible external
devices with an ECG signal. An example of such a device is a defibrillator for cardioversion
synchronization.
CAUTION: It is the users responsibility to confirm correct operation of
the Passport XG with external devices. Before using this
cable it is essential that a biomedical engineer verify correct
operation of the Passport XG with an external device using
this cable. Testing should include verification that the
maximum delay for cardioversion synchronization does not
exceed 60 ms (monitor and defibrillator). Cable should be
labeled with the devices they have been tested for use with.
1.6.22 Using the Passport XG with the Visa Central Station (optional)
The Passport XG must be connected, either through hardwire or telemetry, to the VISA
Central Station. This connection allows the Passport XG to communicate with the VISA to
ADMIT, DISCHARGE, SILENCE and PRINT. The serial output type in the User Configuration
Menu must be set to either “VISA” or “VISA WITH ADMIT”.
NOTE: The VISA Central Station cannot be used in conjuction with
the Gas Module option.
If set to “VISA”, the passport XG can be used to mute alarms and print waveforms on the
VISA. However, the ADMIT and DISCHARGE features will be disabled.
If set to “VISA WITH ADMIT”, the Passport XG can be used to help ADMIT and DISCHARGE
patients to and from the VISA, as well as mute alarms and print waveforms on the VISA.
NOTE: See the VISA Operating Instructions, P/N 0070-00-0245, for
more details on VISA operation with the Passport XG.
The keys that are used on the Passport XG in conjunction with the VISA are: ADMIT (4),
DISCHARGE (5), SILENCE (6) and PRINT (22).