Mindray Passport 5-Lead, Service Manual

Page: 141 / 544

Passport 5-Lead, 5L, LT, XG Service Manual 0070-00-0420 1 - 129
Operation (5-Lead, 5L, LT and XG) Operation (XG)
5. Press the BEEP VOLUME (21) to set the volume of the SpO
2
beep.
6. Set the “Sensor -Off Audio”, in the SpO
2
menu to the desired setting. Set to "OFF", the
Passport will not give an audio beep when the SpO
2
sensor is off the patient. Set to
“ON”, the Passport will give a one time series of 5 triple beeps. Set to “CONT”, the
Passport will give a series of 5 triple beeps every 30 seconds.
* This feature applicable only if available / installed in your unit.
1.6.10.1 Nellcor® Sensors
Nellcor® provides a family of sensors suitable for a wide variety of clinical settings and
patients. Specific sensors have been developed for neonates, infants, children, and adults.
OXISENSOR™ oxygen transducers are sterile adhesive sensors with optical components
mounted on adhesive tape. OXIBAND® oxygen transducers and the DURAFORM™ oxygen
transducer system are reusable sensors that are applied with disposable adhesive. The
DURASENSOR® DS-100A adult digit oxygen transducer is a reusable sensor with its optical
components mounted in a plastic casing. The Nellcor® RS-10 reflectance oxygen transducer
is an adhesive sensor for application to forehead or temple.
NOTE: Nellcor®, OXIBAND® and DURASENSOR® are registered
trademarks of Nellcor® Incorporated. OXISENSOR™ and
DURAFORM™ are trademarks of Nellcor Incorporated.