Mindray Passport 5-Lead, Service Manual

Page: 165 / 544

Passport 5-Lead, 5L, LT, XG Service Manual 0070-00-0420 1 - 153
Operation (5-Lead, 5L, LT and XG) Operation (XG)
.
1.6.15.4 Battery Indicators
When the Passport XG is powered from the battery, a battery symbol will display. When the
battery charge is low, but not below the cutoff voltage, the low battery symbol will display
and a beep is generated every 3 seconds.
NOTE: Less than 15 minutes of operating time remains depending
upon the number of functions that are operational when the
low battery symbol displays.
Battery recharge time is 16 hours.
NOTE: Recorder is not operational when the battery charge is low.
1.6.16 How to Set the Clock
1. Enter the User Configuration Mode. (See “User Configuration Mode” on page 1-153.)
2. Use the UP
p
and DOWN
q
arrow keys (1) to select Date/Time in the User
Configuration Menu. Press the SELECT Key (2) to choose that menu item. The current
choice is highlighted.
3. Use the UP
p
and DOWN
q
arrow keys (1) to select a new setting. Once the desired
choice is highlighted, press the SELECT key (2).
4.
To save this setting press the SELECT key (2) and then the EXIT key (3).
Repeat for each menu item that needs to change.
1.6.17 User Configuration Mode
The Trend Configuration, Date/Time, Temperature Scale, Heart Rate/SpO
2
Size Select,
Alarm Audio Delay, Audio Alarm Standby, Serial Output Type, CO
2
, Color settings and Gas
Module settings may be changed in the User Configuration Mode. This function is only
available at power up and not during normal operation. The User Configuration Mode is
accessed via a special power-up sequence.
To enter the User Configuration Mode:
1.
Turn the POWER switch (34) ON.
AUDIO ALARM
STANDBY
SETTING
ENABLE INDEFINITE SUSPENSION
OF ALARMS
POWER UP MUTE
CONDITION
OFF No Audio Alarms Active
ON Yes Audio Alarms Active
ON and ACTIVE
on Power up
Yes Audio Alarms
Suspended Indefinitely
Full Battery
Symbol
+
Low Battery
Symbol
+