Mindray Passport 5-Lead, Service Manual

Page: 35 / 544

Passport 5-Lead, 5L, LT, XG Service Manual 0070-00-0420 1 - 23
Operation (5-Lead, 5L, LT and XG) Operation (5-Lead, 5L, LT)
1.3.3.4 Parameters Display Area
FIGURE 1-12
Parameter Display Area
The parameters display area contains the current values of the patient parameters. The
contents and the layout of the parameters area depends on how many invasive blood
pressure transducers are connected to the monitor. The example above is with two
transducers connected.
Within the NIBP parameter area the interval chosen is displayed and the elapsed time (ET)
since the last NIBP measurement was taken is displayed. If another NIBP measurement is not
taken within 15 minutes the ET and the NIBP readings will change to dashes.
An “Artifact” message is displayed in the Parameter area (under the ECG Heart Rate)
whenever 60 Hz noise or ESU Interference is present on the ECG waveform.
NOTE: The display sample shown above may not be an exact
representation of your unit.
1.3.3.5 Message Display Area
This area of the display contains messages relating to NIBP, SpO
2
, CO
2
and recorder
operation. Refer to “Status Messages” on page 1-57 for a complete list of these messages.
1.3.4 Use of Menus
The main menus are accessed by using the UP
p
and DOWN
q
arrow keys (1), SELECT (2),
and END (3) keys.The following is an example of how to set the menu options.
1. Using the UP
p
and DOWN
q
arrow keys (1), move the cursor to select the desired
main menu item.
NOTE: As the cursor is moved up and down the list of menu items,
view windows for each menu item are displayed.