Mindray Passport 5-Lead, Service Manual

Page: 189 / 544

Passport 5-Lead, 5L, LT, XG Service Manual 0070-00-0420 1 - 177
Operation (5-Lead, 5L, LT and XG) Operation (XG)
FIGURE 1-94
Set-up Menu
1.6.23.3 Recorder Menu
Wave Selection: Set the waveform or waveforms to be printed.
Record on Alarm:
Set to ON for a recording to be printed each time an alarm situation
occurs.
Record Destination:
Set where the print out will occur. Passport - from the Passport XG,
Central - from the Visa, Both - from both the Passport XG and the Visa.
NOTE: Choices for Wave Selection only include the CO
2
, IBP1, IBP2,
and Gas Module selections when these items are installed
and configured.
NOTE: Record Destination is only displayed when Serial Output
Type is set to “VISA” or “VISA WITH ADMIT”.
CHANGE SET-UP
Waveform 2:
Choices: IBP1, Casc, ECG, Pleth, Resp,
CO2, Agent, O2
= Adjust valve
EXIT = quit
SELECT = Enter/move
Waveform 3:
Powerup settings:
PLETH
No change
IBP1
Auto Display IBP1:
Waveform 2
Auto Display IBP2:
Waveform 3
Auto Display CO2:
Waveform 3
CHANGE SET-UP
Waveform 2:
Choices: IBP1, IBP2, Pleth, Resp,
CO2, Agent, O2
= Adjust valve
EXIT = quit
SELECT = Enter/move
Waveform 3:
Powerup settings: No change
IBP1
Auto Display IBP1:
Waveform 2
Auto Display IBP2:
Waveform 3
Auto Display CO2:
Waveform 3
CHANGE SET-UP
Waveform 2:
Choices: Waveform 2, Waveform 3, Off
= Adjust valve
EXIT = quit
SELECT = Enter/move
Waveform 3:
Powerup settings:
PLETH
No change
IBP1
Auto Display IBP1:
Waveform 2
Auto Display IBP2:
Waveform 3
Auto Display CO2:
Waveform 3
CHANGE SET-UP
Waveform 2:
Choices: Waveform 3, Off
= Adjust valve
EXIT = quit
SELECT = Enter/move
Waveform 3:
Powerup settings:
PLETH
No change
IBP1
Auto Display IBP1:
Waveform 2
Auto Display IBP2:
Waveform 3
Auto Display CO2:
Waveform 3
CHANGE SET-UP
Waveform 2:
Choices: Waveform 2, Waveform 3, Off
= Adjust valve
EXIT = quit
SELECT = Enter/move
Waveform 3:
Powerup settings:
PLETH
No change
IBP1
Auto Display IBP1:
Waveform 2
Auto Display IBP2:
Waveform 3
Auto Display CO2:
Waveform 3
CHANGE SET-UP
Waveform 2:
Choices:No change, Save, Restore
= Adjust valve
EXIT = quit
SELECT = Enter/move
Waveform 3:
Powerup settings:
PLETH
IBP1
Auto Display IBP1:
Waveform 2
Auto Display IBP2:
Waveform 3
Auto Display CO2:
Waveform 3
PLETH
No change