Mindray Imagyn 7, Operator'S Manual

Page: 132 / 492

6 - 6 Operator’s Manual
6 Image Acquisition
iBeam
This function is used to superimpose and average images of different steer angles to obtain image
optimization.
TIP:
The phased probe does not support iBeam.
Auto Merge
In the Dual-split mode, when the images of the two windows have the same probe type, depth,
invert status, rotation status and magnification factor, the system will merge the two images so as to
extend the field of vision.
TIP:
Only for linear probes.
Gray Map
Adjusting grayscale contras to optimize the image.
Tint Map
This function provides an imaging process based on color difference rather than gray distinction.
TSI
The TSI function is used to optimize the image by selecting acoustic speed according to tissue
characteristics.
HDScope
The image inside the ROI is clearer than these outside when the function is enabled.
TIP:
The function is disabled in frozen state.
iTouch
To optimize image parameters as per the current tissue characteristics for a better image effect.
It is available for all real-time imaging in B mode.
H Scale
Display or hide the width scale (horizontal scale).
The scale of the horizontal scale is the same as that of vertical scale (depth), they change together in
zoom mode, or when the number of the image window changes.The H Scale will be inverted when
image is turned upwards/downwards.
Dual Live
Display different image effects of one probe for a better observation.
Two pages of adjustable parameters are displayed on the touch screen as well; where, shared
parameters and left window parameters are displayed in the B (L) page, while right window
parameters are displayed in the B(R) page.
In the image parameter area, parameters of the both windows are displayed.
It supports the magnification of the image.