Mindray Imagyn 7, Operator'S Manual

Page: 209 / 492

7 3D/4D
Operator’s Manual 7 - 13
Reset Curve
Render Mode
The rendering manners can be applied to both gray and inversion modes.
Function: to inverse the echo of the 3D image, so as to enhance observation for low-echo region,
applicable for vessel, cyst and etc.
When the function is turned on, the rendering mode parameters change into the corresponding
inverse parameters.
For details, see “7.3.2 Static 3D Acquisition Preparation”.
Rotate the Image
NOTE:
You can view the back of the VR by rotating it 180°. The back view image may not be as vivid as
the front. (Here we call the initial view of the VR the “front”). It is recommended to re-capture
rather than rotate the VR if a certain desired region is obscured in the VR.
3D iClear • Function: Use the 3D self-adaptation filter to strengthen the space
continuity of the tissue structure, and provide speckle noise suppression,
and improve the image contrast effect, so as to optimize the volume image
data.
• Select VR image. Adjust 3D iClear to optimize VR image.
• Select MPR image. Adjust 3D iClear to optimize MPR image.
Face
+
Optimize the signal of the face area to reduce the noise of the AF area and
improve the signal-noise ratio of the face area, make the face more fullness to
easily obtain the image of fetal face.
VR Refine Optimize the signal-noise ratio and the contrast of VR image.
MagiClean Reduce the noise and keep the boundary of the image more clearly.
Available only in Surface rendering mode.
Depth VR Superimpose the tint map basic on the VR image to improve the stereoscopic
sensation and the contrast of the image.
Hyaline • Function: Improve the transparency in iLive rendering mode to observe
the tissue, such as cyst.
• Adjust method: The merging ratio of two render modes between Hyaline
and iLive is 100%.
• Effect: Adjust the merging ratio of two render modes between Hyaline and
iLive
Thickness Adjust the rendering thickness of the section.
Parameter Description
Parameter Description
Reset Ori To reset the volume rotation, shifting and zooming of 3D image to
original status.
All To reset the parameters, rendering rotation, VOI and image effect.
Curve To reset the curve to be the original beeline.