Mindray Imagyn 7, Operator'S Manual

Page: 160 / 492

6 - 34 Operator’s Manual
6 Image Acquisition
After the acquisition is completed, the panoramic image will be displayed and the system
enters iScape viewing mode.
6.11.2 Image Review
After the acquisition is completed, the panoramic image will be displayed and the system enters
iScape viewing mode.
In image reviewing mode, you can adjust the following parameters.
Image Parameters Settings
• Image size
–
Tap [Actual Size] to display the image in its actual size.
– Tap [Fit Size] to display the image in an appropriate size according to the current window.
• Tint and Tint map
Press the knob under [Tint Map] to activate the function, then change the effect by rotating the
knob.
• Ruler
Tap [Ruler] on the touch screen to hide or show the ruler around the image.
• Color Display (in Power iScape)
Tap [Color Display] on the touch screen to display or hide the color image.
• Color Map (in Power iScape)
Rotate the knob under [Color Map] on the touch screen to select the map, as in Power mode.
Image Zooming
• Rotate <Zoom> to zoom in or zoom out the image.
• Rotate the button clockwise to zoom in the image, the max factor is 10;
• Rotate the button anticlockwise to zoom out the image.
• Roll the trackball to change position of the magnified image.
• Press <Zoom> again to exit zoom mode.
• When the image displayed is bigger than the image area, the thumbnail is automatically
displayed.
Rotating the Image
For the convenience of image viewing, you can rotate the image by rotating the knob under
[Rotation] on the touch screen in increments of 5°.
Measurement, comments, and body mark
In iScape image review status, you can perform measurement, comment, and body mark.
6.11.3 Evaluate image quality
Many variables may affect the overall image quality. It is important to evaluate the image content
and quality before an image is used for diagnosis or measurements.
NOTE:
• iScape panoramic imaging is intended for use by well-trained ultrasound operators or
physicians. The operator must recognize image items that will produce a sub-optimal or
unreliable image.