Mindray Imagyn 7, Operator'S Manual

Page: 106 / 492

4 - 34 Operator’s Manual
4 Setup
Setting DICOM Strategy
NOTE:
• The DICOM strategy must be configured by qualified personnel with good knowledge of
DICOM standards.
• The qualified personnel must ensure the validity of the DICOM strategy.
Perform the following procedure:
1.
Click [Set DICOM Strategy].
2. Edit the DICOM strategy:
– Add: Enter strategy name and description, and click [Add] to add a new strategy. Then the
added strategy will be added to the Strategy List.
– Delete: Select a strategy from the Strategy List, and click [Delete].
– Update: Select a strategy from the Strategy List, re-enter strategy name or description, and
click [Update].
3. Configure the item:
Select a strategy name from the Strategy List, and assign strategy items to the selected strategy.
– Add: Set the function from the drop-list box, enter the parameter 1 and parameter 2, and
click [Add]. Then the added strategy item will be added to the Strategy Items List.
– Delete: Select a strategy item from the Strategy Items List, and click [Delete].
– Update: Select a strategy from the Strategy Items List, reselect the function or re-enter the
parameter 1/2, and click [Update].
4. Import/Export strategy:
– Import: Click [Import], browse the desired strategy file and operate according to the
screen prompts to import.
The imported file for DICOM strategy must be a *.xml file.
– Export: Select a strategy from the Strategy List, click [Export] and then select the export
path and type the file name.
E drive is default, and the file type is .xml.
You can click [Import SR Configuration], [Export SR Configuration], [Reset SR Configuration] to
import, export or reset structure report configuration.
4.7.2 DICOM Service Preset
The DICOM Service screen is used to set attributes for DICOM service.
When the system is configured with DICOM basic function module, and installed with DICOM
modules, the corresponding preset can be found in DICOM Service screen.
TIP:
Not all SCPs can support verification. See the SCP properties to confirm whether the SCP can
support this service. If not, the verification will not be successful.
Perform the following procedure:
1.
Click [Set DICOM Service] on the DICOM/HL7 screen.
2. Select the DICOM service tab to enter the corresponding settings screen.
3. Enter the correct AE Title, port, etc.