Mindray Imagyn 7, Operator'S Manual

Page: 103 / 492

4 Setup
Operator’s Manual 4 - 31
– In the measurement setting, if “Image without measurement(s) stored together” is
selected, the system will save two images after finishing the section operation. One of the
two image will include the measurement result.
– In the measurement setting, if “Store image with measurement(s) first and then store
image without measurement(s).” is selected, the system will store the image in order.
– Select the checkbox of “Disable Protocol Body Marks” for body mark display settings.
4. Click [Save] to complete the setting and exit.
4.6 Stress Echo Preset
4.6.1 Protocol Edit
You can create, edit, delete, copy, export and load the Stress Echo protocols using the Protocol
Editor dialog box.
Creating a Stress Echo Protocol
Perform the following procedure:
1.
Click the [New Protocol] to the right of the Protocol Editor dialog box.
2. Enter the protocol name in the Protocol Name box at the top.
3. For each view (all views display for each phase):
a. Select [New View] in the View list.
b. Select a standard view from the Standard View list. Or you can customize the view name.
4. For each phase in the protocol:
a. Select [New Stage] in the Stage list.
b. Enter a phase name.
– Select [Auto Select], the system jumps to Select Mode after retrospective acquisition.
– Select the required option from the Clip Capture drop-down list.
Item Description
Protocol Name Enter the protocol name.
Trigger Set the trigger type.
WMS model Set the chamber segment division method.
Loop usage: Displays the acquired loop number as well as the total usable loop number.
View Set the views for each stage.
Standard Views: Set the standard view.
Export Import/Export a protocol.
Load
New Protocol Create a new protocol.
Copy Protocol Create a new protocol with an existing one.
Delete Protocol Delete the protocol.
New Stage Create a stage for the current protocol.
Delete Stage Delete the stage.