Mindray Imagyn 7, Operator'S Manual

Page: 410 / 492

19 - 2 Operator’s Manual
19 System Maintenance
Cleaning probes
Cleaning the probe
Tools: mild soapy water, dry soft cloth, soft brush
Method:
1.
Wipe out the dust attached to surface of probe head, connector and cable.
2. Use soft brush to brush the dust inside probe connector gently.
3. Remained stain or dust attached to surface of cable or surface of connector should be washed
out by cloth with a little soapy water, and then air-dry.
NOTE:
Don’t use cloth with water to clean the probe connector.
Cleaning the probe cable
1. Use soft dry cloth to wipe off stains from the probe cable.
2. If it is difficult to clean the stains thoroughly, use soft cloth dipped with mild detergent, and
then let the cable air dry.
Cleaning holders
Tool: dry soft cloth, soapy water, soft brush
Method:
Surface of power button should be cleaned by dry soft cloth. Remained stain should be washed out
by cloth with clear water or soapy water (NOTE: cloth should not be dipped with too much water,
which may cause electric shock), and then air-dry the surface.
1.
Use dry soft cloth to wipe off the dust attached to inside, outside or gap of probe holder or gel
holder. As to small intra-cavity probe holder or its gap, use the soft brush to brush the dust or
stain.
2. Remained stain attached to inside, outside of holder should be washed out by cloth with a little
soapy water and then air-dry after take it out.
3. Gel warmer: Take the gel warmer out after pull out the power supply cable, use dry soft cloth
to wipe off the dust attached to inside and outside, then brush the dust in the gel warmer or
brush the stain with a little soap water and air-dry at last.
Cleaning the monitor and the touch screen
NOTE:
DO NOT use hydrocarbon glass cleaner or cleaner for OA (Office Automation) equipment to clean
the monitor. These substances may cause deterioration of the monitor.
Tool: soft dry cloth, clear water or soapy water
Method:
Surface of monitor and touch screen should be cleaned with soft dry cloth directly. Remained stain
should be washed out by cloth with a little clear water or soapy water, and then air-dry the surface.
Cleaning the trackball
Tools: Paper, dry cloth or mild soapy water
Method:
1.
Disassembling the trackball: