Mindray Imagyn 7 Operator'S Manual Download Page 287 | Manualshive

Page: 287 / 492

background image

13 Display & Cine Review

Operator’s Manual

13 - 7

3.

Save the image if it is necessary.

Measurements, adding comments and body marks are allowed.

4.

Tap [Frame Compare] again to return to image frozen status; press <Freeze> to enter real-time
imaging.

13.5.3 iCompare

NOTE:

iCompare can only be performed on B, Color, Power, PW, CW, or M mode for FRM/CIN/PNG/
DCM files.

Perform the following procedure:
1.

Set the user-defined key to enter iCompare.

2.

In live mode or freeze mode, press the user-defined key for iCompare.

3.

Select a single-frame image, multi-frame image, or screenshot in the iStation screen, Review
screen, or thumbnail area in the main screen.

4.

Press the <Dual> key to switch between the left and right windows. Roll the trackball to
review the cine image on the screen one by one.

The window with the highlighted “M” mark is the current activated window.

When the left window is a screenshot, you cannot switch windows.

5.

Save the image if it is necessary.

Measurements, adding comments and body marks are allowed.

6.

Press <B>, user-defined <Single> key, or the user-defined key to exit iCompare.

13.6 Cine Saving

Live Capture

Live capture refers to saving the images or cines in image scanning status; after the storage, the
system continues image scanning.
Live capture can be divided into 2 kinds: retrospective and prospective.
•

Retrospective saving is to save the specified images before the current moment; to save the
images stored in the cine memory to the system hard disk.

•

Prospective saving is to save the specified images later than the current moment; to save the
images to both the cine memory and the system hard disk.

The live capture time can be set in “Cine” page on the touch screen.
In imaging mode, tap [Pro Capture]/[Retro Capture] on the touch screen or press the user-defined
key for “Save Cine (Prospective)/Save Cine (Retrospective)” on the control panel.

NOTE:

•

Press the save key again or <Freeze> to stop saving.

•

When a saving is completed, a thumbnail is showed in the Thumbnail area.

«
...
285
286
287
288
289
...
»

Summary of Contents for Imagyn 7













































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Imagyn 7

Brand: Tanco Pages: 72

Brand: HABYS Pages: 16

Brand: Acterna Pages: 72

Brand: Abus Pages: 2

Brand: Abus Pages: 12

Brand: Abu Garcia Pages: 6

FreeStyle Comfort

Brand: CAIRE Pages: 33

Brand: V.ORLANDI Pages: 144

Brand: Feniex Pages: 5

Brand: Lumineux Pages: 2

Aristo WeldCloud Mig U5000i

Brand: ESAB Pages: 28

XMLT-24ELED-200CA8-1

Brand: DS Produkte Pages: 28

Brand: Leica Pages: 36

Brand: LiteGait Pages: 43

Brand: ZOLL Pages: 18

Brand: impact Pages: 12

Brand: Otto Bock Pages: 20

Brand: CEM Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands