Mindray Imagyn 7, Operator'S Manual

Page: 113 / 492

4 Setup
Operator’s Manual 4 - 41
Turning on Wi-Fi function
Perform the following procedure:
1.
Select [Network Settings] page in Network Preset screen.
2. Click [Enable Wi-Fi] in the screen.
After Wi-Fi function is enabled, [Disable WIFI] appears on the screen.
Turning on hosted network function
Reserved.
4.8.2 iStorage Preset
You can send exam data or images to the iStorage server and perform analysis using UltraAssist.
For details about this feature, see the UltraAssist manual.
Adding an iStorage service
Perform the following procedure:
1.
Set the iStorage server properties as described above.
2. Click [Add] to add the service to the Service list.
Editing a network service
Perform the following procedure:
1.
Select the service to be updated in the service list.
2. You can see properties in the Configure Service area.
3. Modify the parameters and click [Update] to update the setting.
Advance Enters the “VPN Advance Config” interface.
• Reset: if the system does not respond after you click [Config], click
[Reset].
• Config: enters the “OpenConnect-GUI VPN client” interface. For
details about the settings, please refer to the TAP manual.
NOTE:
After exiting the “VPN Advance Config” interface, you need to
reboot the system; otherwise, you cannot connect VPN normally.
Close Close the “VPN Advance Config” interface.
Item Description
Item Description
Service Name The name of the iStorage service.
IP Address IP address of the iStorage service device.
Port Port for transmitting.
Connect Click to verify connection.
Add Click to add the Network service to the service list.
Update To save the changed parameters.
Delete Click to delete the selected service from the service list.