Mindray Imagyn 7, Operator'S Manual

Page: 390 / 492

17 - 72 Operator’s Manual
17 Probes and Biopsy
The appropriate angle is 30° as shown in the figure below.
Needle Direction
This function adjusts the biopsy needle direction according to actual direction of needle insertion.
The iNeedle affecting region changes correspondingly.
Tap [Needle Dir.] to select the direction.
B/iNeedle
This function is used to display B image and iNeedle image synchronously.
To disable or enable the function, tap [B/iNeedle] on the touch screen.
TIP:
iZoom (full-screen magnification) is available on iNeedle status.
17.2.6 Clean and Sterilize the Needle-Guided Bracket
CAUTION
• Needle-guided brackets whose name starts with NGB are reusable, and
need thorough cleaning and sterilization before and after each biopsy.
• Follow local regulations when selecting and using the disinfectant.
• Repeated sterilization may degrade the safety and performance of the
needle-guided bracket. Before use, please check whether the needle-
guided bracket has defects such as deformation and rusting. If such
defects exist, the bracket has reached the end of its service life. In this
case, stop using it and contact the Mindray service department.
• It is recommended to use immersion sterilization for plastic needle-guided
brackets and high-pressure steam sterilization for metal needle-guided
brackets.
• For detailed operations about the cleaning solvent, sterilant and high-
temperature steam sterilizer, see the respective operator’s manuals
provided by the manufacturer.