Mindray Imagyn 7, Operator'S Manual

Page: 447 / 492

G EMC Guidance and Manufacturer’s Declaration
Operator’s Manual G - 3
RF emissions
CISPR 11 Class B The system is suitable for use in all establishments
including domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes
Harmonic Emissions
IEC 61000-3-2 Class A
Voltage Fluctuations/
Flicker Emissions
IEC 61000-3-3 Compliance
Table G-2
GUIDANCE AND MINDRAY DECLARATION-ELECTROMAGNETIC IMMUNITY
The system is intended for use in the electromagnetic environment specified
below. The customer or the user of system should assure that it is used in such an
environment.
IMMUNITY TEST IEC 60601
TEST LEVEL
COMPLIANCE
LEVEL
ELECTROMAGNETIC
ENVIRONMENT-
GUIDANCE
Electrostatic
Discharge(ESD)
IEC 61000-4-2 ±8 kV contact;
±15 kV air ±8 kV contact;
±15 kV air Floors should be wood,
concrete or ceramic tile. If
floors are covered with
synthetic material, the
relative humidity should
be at least 30%.
Electrical fast
Transient / burst
IEC 61000-4-4 ±2 kV for power
supply lines;
±1 kV for input/output
lines ±2 kV for power
supply lines;
±1 kV for input/output
lines Mains power quality
should be that of a typical
commercial or hospital
environment.
Surge
IEC 61000-4-5 ±1 kV line(s) to line(s);
±2 kV line(s) to earth ±1 kV line(s) to line(s);
±2 kV line(s) to earth Mains power quality
should be that of a typical
commercial or hospital
environment.
Table G-1
GUIDANCE AND MINDRAY DECLARATION-ELECTROMAGNETIC EMISSIONS
The system is intended for use in the electromagnetic environment specified
below. The customer or the user of system should assure that it is used in such an
environment.
EMISSIONS TEST COMPLIANCE ELECTROMAGNETIC ENVIROMENT -
GUIDANCE