Mindray Imagyn 7, Operator'S Manual

Page: 342 / 492

17 - 24 Operator’s Manual
17 Probes and Biopsy
• After disinfection, rinse the sensor thoroughly with sterile water to remove
all chemical residues. Chemical residues may be harmful to the human
body.
• No cleaning and disinfecting may result in the sensor becoming a source of
infection.
• The efficacy of disinfectants and sterilizing solutions is not guaranteed by
MINDRAY. Contact the manufacturers for information on the activity of the
products.
Disinfecting with Sprays or Wipes
CAUTION
Use protective eyewear when disinfecting using sprays.
Perform the following procedure:
1.
Wear sterile gloves to prevent infection.
2. Spray or wipe the sensor (fusion) with a disinfectant. Follow the disinfectant manufacturer’s
recommended contact time and mode.
3. Remove any residue with a water-moistened soft cloth on the sensor.
4. Wipe off water on the sensor using sterile cloth or gauze after washing.
Compatible Disinfectants
Clean and disinfect eTRAX needle using disinfectant and sterilant such as ani-cloth®
HB, CIDEX OPA® (Johnson & Johnson), ENZOL® (Johnson & Johnson), T-Spray™,
Protex™ or ethanol.
Manufacturer Disinfectants
Name
Disinfect times Procedures Type
Advanced
Ultrasound
Solutions Inc. SONO Ultrasound
Wipes 5200 times, 3 min/
time Please refer to the
instructions provided by
the manufacturer of the
solution for details. Wipe
Professional
Disposables
International,Inc. Sani-Cloth 5200 times, 4min/
time Please refer to the
instructions provided by
the manufacturer of the
solution for details. Wipe