Mindray Imagyn 7, Operator'S Manual

Page: 76 / 492

4 - 4 Operator’s Manual
4 Setup
4.1.3 Image Preset
Screen
Saver Screen Saver • Select the different saver methods to the system.
• After enabling the screen saver, check “Mindray'” to select
the image from the system. Or click [Preview] to select the
image on your own.
• To set the waiting time before the system enters dormancy
status in the drop-down list beside “Wait”.
• The system enters screen saver automatically if the system
waiting time exceeds the screen saver already set.
Standby The system enters screen saver automatically if the system
waiting time exceeds the screen saver already set and standby
time.
Display Brightness auto
adjustment To set the brightness/contrast of the main screen and the touch
screen according to the conditions.
LCD To set the brightness and the contrast of the main screen, or
restore to the default.
TouchPanel After selection, the system restores the touch screen settings
back to factory.
Type Item Description
Type Item Description
Reset Config Probe To set the default probe model for the system from the drop-
down list.
The default parameters are applied to the new probe if
checking “Use the default setting when start a new exam.”
Image Size Set the standard for saving the image or using the digital/
graph printer.
Default Elasto Set the default elastography mode.
ART Flow Max transmit time Set the maximum duration time. Enter Color mode and
enable ART Flow; the penetrability of color image is
enhanced in this time period.
Max interval time Set the maximum interval time. Enter Color mode and
enable ART Flow; the ART Flow is enabled again until the
interval is finished.