Mindray Imagyn 7, Operator'S Manual

Page: 100 / 492

4 - 28 Operator’s Manual
4 Setup
Setting Analysis Model
The measurement parameters in different clinical diagnostic scenarios that are used for
reproductive function evaluation are integrated into a dedicated report template, and a user-defined
diagnostic model is supported.
Perform the following procedure:
1.
Select the [Report] on the [Measure] page.
2. Select the report template that supports Analysis Model from the list.
3. Click [Analysis Model].
4. Add a new model.
a. Click [New Model], and enter the model name in the filed box.
b. Click [OK] to confirm.
You can rename, delete, clear, import or export a model.
5. Add a new item.
6. Click [New Item], and select an item type.
7. Set the parameters as needed.
You can move, add, delete, or edit the item.
8. Click [OK] to confirm.
Attributes Descriptions
Standard Item Provides a set of default measurement items and sets relevant parameters.
1. Select a measurement item from the drop-down list, and set the grade
segment.
The unit is provided by default.
2. Enter the measurement value and scores.
3. Click [OK] to confirm.
Custom Item Adds user defined measurement items and sets relevant parameters.
1. Select a result type.
For the Numerical type, the measurement value is numbers and the
unit needs to be defined. For the Text type, the measurement value is
text and the unit is not available to be defined.
2. Enter a user-defined measurement item, and set the grade segment.
3. Enter the measurement value and scores.
4. Click [OK] to confirm.
Check “Always display in report” to display the custom item in the report.
Summary Item Sets the Summary of all items.
1. Set the grade segment.
2. Enter the scores and assessment.
The score is the total sum of all items, and the assessment is given on
this basis.
3. Click [OK] to confirm.