Mindray Imagyn 7, Operator'S Manual

Page: 281 / 492

Operator’s Manual 13 - 1
13
Display & Cine Review
13.1 Splitting Display
The system supports dual-split and quad-split display format. However, only one window is active.
The multi-window display can complete the image and multi-frame image comparison.
Dual-split
Press <Dual> on the control panel to enter the dual-split mode, and use <Dual> / <Update> key to
switch between the two images; press <B> to exit.
Modes support dual-split display: B mode, Color mode, Power mode, PW mode, CW mode, M
mode and Color M mode.
Quad-split
Press the user-defined <Quad> key to enter the quad-split mode, and use the user-defined key to
switch among four images; press <B> to exit.
Modes support quad-split display: B mode, Color mode and Power mode.
13.2 Image Magnification
NOTE:
Zooming an image changes the frame rate which tends to change thermal indices. The position of
the focal zones may also change which may cause the peak intensity to occur at a different location
in the acoustic filed.As a result, the MI may change.
13.2.1 Res Zoom
NOTE:
• Res Zoom only can be realized on a scanning image.
• The size and position of ROI will be changed along with scanning depth and area.
Perform the following procedure:
1.
Press <Zoom> to enter the sample volume definition status.
2. Roll the trackball to change the box size and position. Press <Set> to toggle between setting
the size and position, or rotate the <Zoom> knob to adjust the size. After the sample volume is
set, press <Zoom> / <Update> again to enter Res zoom status.
3. Rotate the <Zoom> knob or to change the magnification factor. Or enter the touch screen
mapping mode, and zoom the image by pinching two fingers on the touch screen. The image
magnification factor value will display in real time in the image parameter area.
4. Press <Zoom> to exit Res zoom.