Mindray Imagyn 7, Operator'S Manual

Page: 370 / 492

17 - 52 Operator’s Manual
17 Probes and Biopsy
f. Pull the lock pin and close the V-shaped cover to fix the lock pin in the groove of the
needle type adjusting base, so as to install the needle into the guiding hole.
2. Separate the needle in the operation.
a. Open the block pin until the V-shaped cover can be rotated.
b. Rotate V-shaped cover until the needle is separate from it. Remove the probe and the
bracket.
3. Remove the needle-guided bracket:
Unscrew the pinch nut to separate the needle-guided bracket from the probe. Release the
needle-guided bracket from the probe.